Table of Contents
Advertisement
4. Measure the height of the top of the front
wheel opening on the fender to ground; this
is height H1.
Measuring Height (H)
5. Attach the trailer to the vehicle without the
weight distribution bars connected.
6. Measure the height of the top of the front
wheel opening on the fender to ground; this
is height H2.
7. Install and adjust the tension in the weight
distributing bars per FCA recommendations
so that the height of the front fender is
approximately (H2-H1)/3+H1 (about 1/3
the difference between H2 and H1 above
normal ride height [H1]).
8. Use the instrument cluster or touchscreen
radio settings and switch off tire jack mode.
Make sure the truck returns to normal ride
height. Perform a visual inspection of the
trailer and weight distributing hitch to
confirm FCA recommendations have been
met.
STARTING AND OPERATING
9. The truck can now be driven.
Measurement
Example Height
Example
H1
H2
H2-H1
(H2-H1)/3
(H2-H1)/3 + H1
NOTE:
For all towing conditions, we recommend towing
with tow haul mode engaged.
217
(mm)
925
946
21
7
4
932
Advertisement
Table of Contents
