Table of Contents
Advertisement
ENGINE FLUIDS AND LUBRICANTS
Component
Gas Engine Coolant
Motor Generator Unit – 3.6L Engine (If Equipped)
Engine Oil – 3.6L Engine
Engine Oil – 5.7L Engine
Gas Engine Oil Filter
Fuel Selection – 3.6L Engine
Fuel Selection – 5.7L Engines
Diesel Engine Coolant
Engine Oil — 3.0L Turbo Diesel Engine
Diesel Engine Oil Filter
Fluid, Lubricant, or Genuine Part
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km)
Formula OAT (Organic Additive Technology).
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km)
Formula OAT (Organic Additive Technology).
We recommend you use API Certified SAE 0W-20 engine oil, meeting the requirements of FCA
Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil
filler cap for correct SAE grade.
We recommend you use API Certified SAE 5W-20 engine oil, meeting the requirements of FCA
Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil
filler cap for correct SAE grade.
We recommend you use Mopar brand engine oil filters.
87 Octane (R+M)/2 Method, 0-15% ethanol (Do not use E-85).
89 Octane Recommended - 87 Octane Acceptable (R+M)/2 Method, 0-15% ethanol (Do not
use E-85).
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km)
Formula OAT (Organic Additive Technology).
We recommend you use 5W-40 synthetic engine oil such as Mopar that meets FCA Material
Standard MS-12991 and the API SN engine oil category is required.
We recommend you use Mopar engine oil filters. Using an oil filter that does not meet FCA's
filtration requirements can severely impact engine life and reliability.
TECHNICAL SPECIFICATIONS
475
9
Advertisement
Table of Contents
