Table of Contents
Advertisement
3. Pass the tether strap hook through the
space between the head restraint and the
seat back behind the child seat, through the
tether strap loop behind the seat and over
to the center tether strap loop.
Tether Strap Through Outboard Tether Strap Loop
4. Attach the hook to the center tether strap
loop (see diagram). Tighten the tether strap
according to the child seat manufacturer's
instructions.
Tether Strap Through Outboard Tether Strap Loop And
Attached To Center Tether Strap Loop
NOTE:
If there are child seats in both of the outboard
(left and right) seating positions, the tether
strap hooks of both child seats should be
connected to the center tether strap loop. This
is the correct way to tether two outboard child
seats.
Center Seat:
1. Reach between the rear seat and rear
glass to access the tether strap loop.
Center Tether Strap Loop Location
2. Place a child restraint on the seat and
adjust the tether strap so that it will reach
over the seat back and headrest, through
the tether strap loop behind the seat and
over to the tether strap loop behind either
the right or left outboard seat.
SAFETY
367
6
Advertisement
Table of Contents
