Table of Contents
Advertisement
NOTE:
Unfold the panel gently, and do not allow the
panels to drop under their own weight.
7. Completely unfold the Tonneau Cover.
CAUTION!
The vehicle cannot be driven when the Ton-
neau Cover is in the second panel position.
Position Two (Fully Unfolded)
8. Repeat steps 2 through 3 for the rear pair of
latches.
9. Pull down on the handle to ensure the Slide
Locking Lever is fully engaged. Do this for
both the left and right side.
NOTE:
Also check to ensure the bumper is forward of
the bead on the underside of the truck flange.
Make sure that the Tonneau Cover is positioned
fully forward, so that the bumper clears the
bead.
Pull Up On Tonneau Cover Corners
GETTING TO KNOW YOUR VEHICLE
10. Gently pull up on all four corners of the
Tonneau Cover to ensure that it is properly
latched.
CAUTION!
It is the driver's responsibility to ensure the
Tonneau Cover is properly installed on the
vehicle. Failure to follow this procedure can
result in detachment of the Tonneau Cover
from the vehicle and/or damage to the vehi-
cle/Tonneau Cover.
T
-F
T
C
RI
OLD
ONNEAU
OVER
For proper cleaning of the Tonneau Cover, use
Mopar Whitewall & Vinyl Top Cleaner and Mopar
Leather & Vinyl Conditioner/Protectant.
103
2
C
LEANING
Advertisement
Table of Contents
