Conformity With Ec Directive / Ul Standard; Ec Directive - Panasonic MINAS-A4P Technical Reference

13. Conformity with EC Directive / UL Standard

13-1 EC Directive

The EC Directive is applied to all electronic products that provide proper functions and are exported to EU
(European Union) for direct sales for general consumers. These products must conform to the EU-uniformed
safety standards, and the CE marking that indicates the conformity with the standards must be affixed to the
products.
To facilitate the conformity of the machinery or equipment that incorporates the AC servo to the EC Directive,
Matsushita Electric Industrial Co., Ltd. realizes conformity with the relevant standards of the Low Voltage
Directive.
13-1-1 Conformity with the EMC Directive
For our servo systems, we define the models (conditions) of the servo amplifier - servo motor installation
distance and wiring, and provides the conformity of the models with the relevant standards of the EMC
directive. Therefore, when the servo system is actually incorporated in machinery or equipment, its wiring and
grounding conditions may be different from the model. For this reason, the machinery or equipment that
incorporates the servo amplifier and servo motor must undergo the final examination to verify the conformity
with the EMC Directive (especially for electromagnetic interference and conducted emission).
13-1-2 Conformable standards
Target
Motor IEC60034-1 IEC60034-5 UL1004 CSA22.2 No.100
Motor /
EN50178 UL508C
Servo
amplifier
EN55011
IEC61000-4-2 Electrostatic Discharge Immunity Test
IEC61000-4-3 Radio Frequency Radiation Electromagnetic Field
IEC61000-4-4 Electrical High-speed Transient Phenomena / Burst
IEC61000-4-5 Lightning Surge Immunity Test
IEC61000-4-6 High-frequency Conduction Immunity Test
IEC61000-4-11 Momentary Power Failure Immunity Test
IEC: International Electrotechnical Commission
EN: Europaischen Norman = Europe Norm
EMC: Electromagnetic Compatibility
UL: Underwriters Laboratories
CSA: Canadian Standard Association
A4P
Conformable standards
Radio Interference Wave Characteristics for Industrial,
Chemical and Medical High-frequency Equipment
Immunity Test
Immunity Test
MOTOR COMPANY, MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD
- 117 -
No. SR-DSV09485
Conforms to the
relevant
standards of the
Low Voltage
Directive.
Conforms to the
relevant
standards of the
EMC Directive.