Introduction; Safety Summary - Insinger CX20 Series Technical Manual

INTRODUCTION

This manual contains all pertinent information to assist in
the proper installation, operation, cleaning, maintenance,
and parts ordering for the CX20, CX20H and CX20S
dishwashers.
The installation instructions are intended for qualified
equipment installers.
The operation and cleaning instructions are intended for
the daily users of the equipment.
The maintenance and drawing sections are intended for
qualified service and/or maintenance technicians.
Replacement parts may be ordered directly from our
factory or from your local Authorized Insinger Service
Company.
Surefire Start-Up Program
Insinger is proud to offer our exclusive Surefire Start-up
& Check-out Program to our commercial customers. This
service is included in the purchase price of your new
Insinger dishwasher. We will provide an authorized
factory service technician for the initial start-up of your
new Insinger dishwasher to ensure it is running correctly.
Please call the factory or your local Insinger Sales or
Service Representative to schedule this service.
NSF 3 requirements for chemical dispensers
This machine must be operated with an automatic
detergent feeder and, if applicable, an automatic
chemical sanitizer feeder, including a visual means to
verify that detergents and sanitizers are delivered or a
visual or audible alarm to signal if detergents and
sanitizers are not available for delivery to the respective
washing system. Please see instructions for electrical
and plumbing connections located in this manual and in
the feeder equipment manual.
Intended Use
This Insinger dishmachine may only be used for cleaning
ware placed in a dish rack.
Any change in design or use of the dishwasher carried
out without the written permission of Insinger, will lead to
warranty nullification.
If damage is caused to the dishwasher due to failure to
observe the instructions given in this manual, no claims
under the warranty agreement can be submitted to
lnsinger Machine Company.
CX20 SERIES
PART 1 TECHNICAL INFORMATION
DEFINITIONS
Throughout this guide you will find the following terms:
WARNING, CAUTION, & NOTE.
WARNING:
Indicates a potential physical danger
Indicates a potential equipment damage
NOTE :
Indicates helpful operating hints or tips

SAFETY SUMMARY

The following are general safety precautions that are not
related to any specific procedures. These are
recommended precautions that personnel must understand
and apply during many phases of operation and
maintenance.
Keep Away From Live Circuits
Operating personnel must at all times observe all safety
regulations. Do not replace components or make
adjustments inside the equipment with the power supply
turned on. Under certain conditions, dangerous potentials
may exist when the power control is in the off position. To
avoid casualties and injuries, always remove power, red
tag and lockout machine, and ground a circuit before
touching it.
Do Not Service or Adjust Alone
Under no circumstances should any person reach into or
enter the enclosure for the purpose of servicing or
adjusting the equipment except in the presence of
someone who is capable of rendering aid.
Resuscitation
Personnel working with or near high voltages should be
familiar with modern methods of resuscitation. Such
information may be obtained from the Bureau of Medicine
and Surgery.
7
CAUTION:
www.insingermachine.com 800-344-4802