Select Process Chemicals; Pre-Cleaning; Wipe Disinfection - Atmos Record 55 Operating Instructions Manual

5.3.2 Select process chemicals

Always observe the manufacturer's specifications for the process chemicals.
Cleaning agent
(manufacturer) Active ingredients in 100 g
Disinfection
Green & Clean SK
(Metasys)
Dismozon® plus
(Bode Chemie)
Kohrsolin® FF
(Bode Chemie)
Kohrsolin® extra
(Bode Chemie)
Perform® (Schülke
& Mayr)
Mikrobac® forte
(Bode Chemie)
Bacillol® 30 Foam
(Bode Chemie)
Incidin® Active
(Ecolab)
Mikrozid® Sensitive
Wipes (Schülke &
Mayr)

5.3.3 Pre-cleaning

1. Disconnect the device from the mains power supply.
2. Clean the surface evenly with a suitable cloth and clear water. Pay particular
attention to hard to reach areas.
» There is no more residue visible.

5.3.4 Wipe disinfection

Always observe the manufacturer's specifications for the process chemicals.
20 Reprocessing
<1 g of dialkyldimethylammonium chloride, <1 g of
alkyldimethylethylbenzylammonium chloride, <1 g of
alkyldimethylbenzylammonium chloride
95.8 g of magnesium peroxyphthalate hexahydrate
5 g of glutaral, 3 g of benzyl C 12 -C 18 -alkyldimethylammonium chlorides, 3
g of didecyldimethylammonium chloride
14.1 g (ethylenedioxy) dimethanol, 5 g glutaral, 8 g
didecyldimethylammonium chloride
45 g of pentapotassium bis (peroxymonosulfate) bis (sulfate)
19.9 g of benzyl C12-18-alkyldimethylammonium chloride, 5 g of N-
(3-aminopropyl) -N-dodecylpropane-1,3-diamine
14 g of ethanol, 10 g of propan-2-ol, 6 g of propan-1-ol, 0.5 g of N-alkyl-
aminopropylglycine
Peracetic acid
0.26 g of alkyl (C12-16) dimethylnezylammonium chloride, 0.26
g of didecyldimethylammonium chloride, 0.26 g of alkyl (C12-14)
ethylbenzylammonium chloride
Type
Foam x
Ready for use
Granulate x
Liquid x
concentrate
Liquid x
concentrate
Powder x
Liquid x
concentrate
Foam ready to x
use
Powder x
Wipes x