Select Process Chemicals; Pre-Cleaning - Atmos LC 27 Operating Instructions Manual

Surface
Release button
Control panel

5.3.2 Select process chemicals

Observe the process chemical manufacturer's specifications.
If heavily soiled, clean the device surface directly with a cloth moistened with clean
water.
Agent
(manufacturer) Active ingredients in 100 g
Cleaning
Mikrozid® Sensitive 0.26 g of alkyl (C12-16) dimethyl nezyl ammonium chloride,
Wipes (Schülke & 0.26 g of didecyl dimethyl ammonium chloride, 0.26 g of
Mayr) alkyl (C12-14) ethyl benzyl ammonium chloride
Disinfection
Green & Clean SK <1 g of dialkyl dimethyl ammonium chloride, <1 g of alkyl
(Metasys) dimethyl ethyl benzyl ammonium chloride, <1 g of alkyl
dimethyl benzyl ammonium chloride
Bacillol® 30 Foam 14 g of ethanol, 10 g of propan-2-ol, 6 g of propan-1-ol, 0.5
(Bode Chemie) g of N-alkyl-aminopropyl-glycine
Mikrozid® Sensitive 0.26 g of alkyl (C12-16) dimethyl nezyl ammonium chloride,
Wipes (Schülke & 0.26 g of didecyl dimethyl ammonium chloride, 0.26 g of
Mayr) alkyl (C12-14) ethyl benzyl ammonium chloride
Mikrozid® Universal Alcohols
Wipes (Schülke &
Mayr)
Bacillol® AF (Bode Alcohols
Chemie)

5.3.3 Pre-cleaning

1. Disconnect the device from the mains power supply.
2. Clean the surface evenly with a suitable cloth and clear water. Pay particular
attention to areas which are difficult to access.
3. Remove the suction hose and rinse it out with water over a sink.
» There is no more soiling visible.
x x x x
x x x x
Remarks
As per agent manufacturer's instructions
As per agent manufacturer's instructions
Art
Wipes x x x x x
Foam x x x x x
Ready for use
Foam x x x x x
Wipes x x x x x
Wipes x x x x x
Solution x x x x x
Ready for use
Cleaning and disinfection
27