Maintenance; Engine Oil Change - Energizer EZG Series User Manual

8. MAINTENANCE

Periodic maintenance will keep your generator in the best operating condition.
Read the instructions before you begin, and make sure you have the
tools and skills required.
Stop the engine before starting maintenance work.
To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related products.
If you are not familiar with maintenance work, have an authorized
dealer do it for you.
Use ours or equivalent quality parts for replacement. Ask an
authorized dealer for further attention.
Maintenance Schedule
Regular Service Period (5)
Each
use
Item
Check level
Engine oil
Change
Air cleaner Clean
Check-adjust
Spark plug
Replace
<<31>>
Every 6 Every 1 Every 2
months or year or 100 years or
50 hrs. 300 hrs.
⊙
⊙(1)
⊙(2)
⊙
Spark arrester
Valve Clearance
Combustion
Fuel tank & ilter
Fuel line
(1). Change engine oil after the first 10 hrs.
(2). Service more frequently when used in dusty areas.
(3). These items should be serviced by your servicing dealer, unless you
have the proper tools and are mechanically proficient.
(4). Replace fuel line if necessary, every 2 years.
(5). For commercial use, long hours of operation to determine proper
maintenance intervals. Failure to follow this maintenance schedule could
result in non-warrantable failures.

8.1 ENGINE OIL CHANGE

Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
(1). Open the Oil Cover.
(3). Place a suitable Container next to the engine to catch the used oil.
(4). Remove the Oil Cap/Dipstick, and use a device to make a Pipe that its
diameter is about 30mm.
(5). Set fully the paper Pipe outside of the Oil Filler Neck, and drain the used oil
into the Container 3 by tipping the engine toward the Oil Filler Neck.
⊙
Clean
Check-adjust
Clean
Chamber
Clean
Check
⊙
⊙(3)
⊙(3)
⊙
⊙(4)
<<32>>