Energizer EZG Series User Manual page 7

Hide thumbs Also See for EZG Series:
Table of Contents

Advertisement

The operator must know the principles of functioning and the structure of
the generator and the motor. He must know how to stop the motor in case
of urgency and how to manipulate the controls.
Never let children use this device.
Never let people who do not know these instructions use this device.
Local regulations may impose restrictions on the age of the user.
Please do not use this device when people, especially children, or pets are
nearby. Direct them away from the working area.
The operator or the user are responsible for possible accidents or damage
to other persons or to their property.
Do not wear loose clothing or jewelry as this can get caught in the
machinery as it runs.
Use safety equipment. Wear protective gear such as an anti-dust mask,
non-slip safety shoes, and a helmet or hearing protection.
Stay vigilant, watch what you are doing and show good sense when you
use the generator. Do not use if you are tired or under the influence of
drugs, alcohol or medicines.
Install the generator in a place that is well ventilated and make sure that
there is at least 1.5 meters between the generator and the walls of the
building or other equipment. Do not place flammable liquids or gases near
the generator.
Do not run the generator in an enclosed or badly-ventilated
space. The exhaust gas from the motor contains carbon monoxide which
is toxic and may lead to a loss of consciousness or death.
Run the generator in respect of the power indicated in the
user's manual. Do not run the generator with an overload or at excessive
speed.
The silencer of the generator becomes extremely hot when the motor runs
or even for a time after it has stopped. Do not touch it as it will burn you.
Do not transport or move the generator until it has cooled down.
Perform periodic maintenance and resolve problems that appear
immediately. Do not run the generator before correcting any fault detected.
<<09>>
The generator uses a system of air-cooling, and it is necessary to clean
its components regularly, including the grilles, the cover of the fan and
the fan itself so as to ensure cooling.
Keep the fuel filter clean, and change the oil of the motor regularly.
Periodically check the installation of the connections and the tightness of
the fixations, re-tightening them if necessary.
Clean the components of the air filter periodically, and replace the air
filter when necessary.
Remove any electrical equipment that is plugged in before starting or
stopping the generator.
Before transporting the generator, you must empty the fuel tank.
Maintenance and repair of the generator must be carried out by a
qualified technician from an authorized after-sales service center.
The generator must not be altered or modified. Any intervention must be
done by an authorized after-sales service center.
Installation and major repair work shall be carried out only by specifically
trained personnel
Warning: when you start the generator with the cord, watch out for sudden
changes in the rotation of the motor!!! Risk of wounding!!! Never cover the
generator when it is running. The cut-out mounted on the generator has the
aimed of reducing the risk of electric shock. If it needs to be replaced with
another cut-out, the latter must correspond to the technical specifications of
the generator. Due to important mechanical constraints, it is necessary to use
a flexible sheathed cable with a strong rubber protective layer (conforming to
IEC 245-4) or a similar cable. If using an electrical extension cable, the total
length of the extension must not exceed 60m when the section of the wire is
1.5mm
and must not exceed 100m when the section of the wire is 2.5mm
2
.
2
<<10>>

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ezg3300i

Table of Contents