Drain The Fuel From Fuel Tank; Drain The Fuel From The Carburetor Again; Engine - Energizer EZG Series User Manual

Hide thumbs Also See for EZG Series:
Table of Contents

Advertisement

9.2 DRAIN THE FUEL FROM FUEL TANK

(1). Unscrew the Fuel Cap, remove the Fuel Tank Filter.
(2). Empty the fuel tank into the suitable container by slowly tipping the
generator toward the Fuel tank Neck.
(3). Reinstall the Fuel Tank Filter and the Fuel Cap.
(4). Tighten clockwise the Fuel Cap securely.

9.3 DRAIN THE FUEL FROM THE CARBURETOR AGAIN

<<39>>
(1). Turn the Fuel Cap Vent Lever to the "ON" position.
(2). Turn the Fuel Tap to the "ON" position.
(3). Put the Drain Hose into a suitable container.
(4). Loosen the Drain Screw counterclockwise.
(5). Drain the gasoline from the Carburetor into the container through the Drain
Hose.
(6). Tighten the Drain Screw clockwise securely.
(7). Reinstall the Drain Hose into the hole at the bottom casing.
(8). Reinstall the Maintenance Cover.
Gasoline is highly flammable and explosive.
Keep heat, sparks, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.

9.4 ENGINE

(1). While engine is still warm, drain oil from crankcase. Refill with the
recommended new oil.
(2). Remove spark plug and pour about 15ml (1/2 ounce) of engine oil into the
cylinder through spark plug hole on the engine cylinder head, and cover
spark plug hole with rag. Pull the starting rope several times to coat the
cylinder walls with engine oil.
(3). Install and tighten the spark plug.
(4). Pull the Starter Grip until you feel compression, and then stop pulling. (This
prevents the cylinder and valves from rusting)
(5). Clean the generator outer surfaces. Check that cooling air slots and
openings on generator are open and unobstructed.
(6). Store the unit in a clean, dry place. If possible, store the unit indoors and
cover it to give protection from dust and dirt.
<<40>>

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ezg3300i

Table of Contents