Energizer EZG Series User Manual page 9

To avoid electric shock, you must follow the following instructions:
Do not touch the generator with wet hands.
Do not run the generator under rain or snow.
Do not run the generator near water.
When connecting the generator to earth, use a sufficiently thick conductor
for the earth wire.
Do not operate the generator in parallel with another generator.
If using electrical extensions, make sure that they are sufficiently thick to
transport the current and that they are used correctly.
The connection of a generator used for auxiliary power to the
electrical installation of a building must be performed by a qualified
electrician, and in conformity to the provisions of the applicable laws and
norms in the field of electricity. Incorrect connections will cause leakage
of the current from the generator into the lines of the public electricity
company. Such leakage could electrocute the workers of the public
electricity company working on the network or other persons in contact
with the line during a power cut. Also, when the public power supply is
re-established, the generator can explode, catch fire or generate fires
in the building's electrical installation.
Before connecting electrical devices to the generator,
make sure that their voltage specifications and frequency of functioning
correspond to the technical characteristics of the generator. There may
be damage if the device connected is not designed to function with a
voltage tolerance of +/- 10% or a frequency tolerance of +/- 3 %
compared with those of the generator.
<<13>>
Protection of the environment
You must periodically check the silencer (before doing this, switch off the
generator and let it cool completely). A damaged silencer increases
noise.
Do not throw motor oil into the drains but deposit it at a collection point
set up for that purpose.
The fuel for this machine is combustible and explosive. After stopping the
machine, you must handle the remaining fuel correctly and meet local
environmental requirements.
To use the WIFI function please read the additional manual provided with this one.
<<14>>