Energizer EZG Series User Manual page 24

No AC output:
Is the generator overloaded?
Is AC voltage low?
Is the electrical device short
circuit?
Contact with an authorized dealer
No DC output
Is the DC voltage low?
Is the DC circuit protector OFF?
Check the electrical appliance for
any fault
Contact with an authorized dealer
<<43>>
Reduce loads and push reset
Button to reset module
Verify the choke is on run position,
and check fuel in the fuel tank and
carburetor, and check air filter
Verify condition of any extension
cords and all items being
powered, then push reset button
to reset
Verify ECO Switch is on the "0"
OFF position
Push the DC circuit protector ON.
Change or replace the appliance
Fuel leaks from drain hoses.
Is the pressure in fuel tank
Is the carburetor drain in bowl not
closed?
Contact with an authorized dealer
Open fuel tank vent to balance
pressure
Turn drain screw clockwise to close
<<44>>