Configure The Drive Digital Input Parameters; Configure The Drive Digital Output Parameters - Allen-Bradley Ultra1500 Quick Start Manual

Configure the Drive Digital Input Parameters

The Ultra1500 drive Digital Input parameters must be configured appropriately because the MicroLogix 1400
controller uses them to enable the Ultra1500 drive and clear its drive faults.
To configure the Ultra1500 drive Digital Input parameters, perform the following steps.
1. Double-click Digital Inputs.
2. Change the
Input 1 value
to Drive
Enable.
3. Change the
Input 2 value
to Fault
Reset.
The Ultra1500 drive Follower Digital Input parameters specify which Ultra1500 drive functionality is
IMPORTANT
mapped to which digital input. The MicroLogix 1400 controller application code uses digital input 1 to
enable the Ultra1500 drive and digital input 2 to clear the Ultra1500 drive's faults. If either digital input is
configured incorrectly, you will not be able to employ this functionality.

Configure the Drive Digital Output Parameters

The Ultra1500 drive Digital Output parameters must be configured appropriately because the MicroLogix
1400 controller uses them to determine if the Ultra1500 drive is ready.
To configure the Ultra1500 drive Digital Output parameters, perform the following steps.
1. Double-click
Digital
Outputs.
2. Change the
Output 1
value to
Ready.
Publication CC-QS008B-EN-P - December 2009
Ultra1500 Drive Integration Chapter 1
17