Follow These Steps; Connect To The Ultra1500 Drive Via Ultraware - Allen-Bradley Ultra1500 Quick Start Manual

Chapter 1 Ultra1500 Drive Integration

Follow These Steps

Follow these steps to configure each of your Ultra1500 drives.

Connect to the Ultra1500 Drive via Ultraware

Ultra1500 drives are configured by using Ultraware (catalog number 2098-UWCPRG) software. Ultraware
software is a Windows-based application that allows drive configuration to be done offline and saved to disk.
By using the Ultraware software, your personal computer can be connected to the Ultra1500 drives with the
Ultra1500 serial interface cable (catalog number 2090-DAPC-D09xx).
12
Start
Connect to the Ultra1500
Drive via Ultraware, page
12
Reset the Drive to Factory
Settings, page 14
Configure the Drive
Operation Mode
Parameter, page 15
Configure the Drive
Follower Parameters,
page 15
Configure the Drive
Encoder Output
Parameters, page 16
Configure the Drive
Digital Input Parameters,
page 17
Configure the Drive
Digital Output
Parameters, page 17
Save the Drive
Parameters, page 18
Configure Your
Application-specific Drive
Parameters, page 18
Publication CC-QS008B-EN-P - December 2009