Table of Contents
Advertisement
To configure the Operation mode parameter, perform the following steps.
1. Connect your personal computer's serial connection to the
Ultra1500 drive's CN3 connection by using the Ultra1500 serial
interface cable.
Consult the Ultra1500 drive user manual for further information.
2. Go online with the Ultra1500 drive by using the
Ultraware software.
Consult the Ultra1500 drive user manual for
further information.
Your Ultra1500 drive must be listed in the On-Line Drives section, as shown above. If it is not listed in the
TIP
On-Line Drives section, then your Ultra1500 drive is still offline.
After your Ultra1500 drive is online and you are able to browse its parameters, continue to the next section.
Publication CC-QS008B-EN-P - December 2009
Ultra1500 Drive Integration
Chapter 1
13
Advertisement
Table of Contents
