Regulation The Section Volumes; Organ Style - Viscount Chorale 8 User Manual

Table of Contents

Owner's Manual

Chorale 8

Viscount

4. REGULATING THE SECTION VOLUMES

Pressing the [VOL.] piston on the Swell panel displays the section volumes video page:

Use the [FIELD ] and [FIELD ] buttons to move the cursor to the relevant section and [VALUE +] and

[VALUE -] to adjust the volume as required. To confirm the changes and exit the video page, press the [EXIT]

button.

One important feature of the Chorale 8 series is the availability of four different organ styles, Baroque, French,

English and American which allow you to set the sound configuration perfectly suited to the literature you intend

to perform

Since they have been programmed as appropriate to the different schools of organ building, these styles

cannot be modified by the user. There are 4 additional User styles, which can be modified as required.

Remember that the stop switches on the front panel can contain more than one register each. This is because

when different styles are selected, the registers assigned to the various stops may change. The names of the

registers marked on the stops are the ones which will be recalled by the preset styles; however, the User styles

may recall registers the names of which are not screen-printed on the stops if the user programmes them to do

this.

Each style automatically saves the modifications made to the sound setup using the voice replacement

functions and voice volume adjustments. This means that each style can be modified and customised to

personal taste, making the organ extremely flexible.

When a specific basic setup is required during programming, the instrument also allows a style (which

may be a fixed style) to be copied into another User style using the STYLE COPY function described in

point 9.1.

The video page used to select the organ style required is displayed a few moments after the organ is

switched on. The style can be recalled using the STYLE parameter.

Using the [VALUE +] and [VALUE -] buttons you can select the desired style.

Table of Contents