Changing Number Plate Light Bulbs - Seat Leon Owner's Manual

Note
For LED pilots, you can only change the fog or reverse bulb, on the left or
right guide.
Fitting the bulb holder
– Install the bulb holder making sure that locking clips
are properly clipped on.
A
– Replace the cover of the rear lid lining

Changing number plate light bulbs

1)
Depending on how equipped the vehicle is, the number plate lights may be LEDs. LEDs
have an estimated life that exceeds than that of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
Safety First
⇒ F ig. 147
⇒ F ig.
146.
1)
Fig. 149 In the rear
bumper: number plate
light
Operating instructions


Follow the steps indicated:
1. Press the number plate light in the direction of the arrow
⇒ F ig.
149.
2. Remove the number plate bulb slightly.
3. In the connector lock, turn
the connector.
4. Rotate the bulb holder in the direction of arrow
with the bulb.
5. Replace the defective bulb with a new bulb with the same fea-
tures.
6. Insert the bulb holder in the number plate light and turn in the
opposite direction of arrow
Practical Tips
Fuses and bulbs
Fig. 150 Number plate
light: remove the bulb
holder
⇒ F ig. 150
towards arrow and pull
A
and extract it
B
until it stops.
B
Technical specifications
261
