Introduction; Sn740 Reset Button - Patton SmartNode 4740 Series User Manual

SmartNode 4740 Series (16–32 Ports) User Manual

Introduction

The RESET button (see
• Reboot the SmartNode device (see section
POWER LED is lit"
• Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
LED is lit" on page 64)
• Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
"Resetting the SmartNode device when it is operating and the POWER LED is lit"
Introduction
figure 23 for the SN4141E) is used to do the following:
"Resetting the SmartNode device when it is operating and the
on page 64)
"Resetting the SmartNode device when it is operating and the POWER
Figure 23. SN740 RESET button
F • Reset Button Functions
on page 64)
63