Introduction; Start The Smartnode Discovery Tool; Smartnode Discovery Tool Window - Patton Smart Node 4120 User Manual

SmartNode 4120 User Manual

Introduction

This chapter leads you through the basic steps to set up a new SN4120:
• Start the SN4120 Discovery Tool (see section
• Access the Web Browser (GUI) Interface (see section
page 27)
• Configuring your SN4120 (see section
This section describes how to quickly access the configuration interface of a SN4120 and give an overview of
the different elements you can configure. For detailed information on all configuration parameters refer to the
SmartWare software configuration guide.

Start the SmartNode Discovery Tool

The SmartNode discovery tool provides a quick and easy way to access the management interfaces residing
within your SN4120. The tool identifies any Patton VoIP devices installed on your network and displays the
model number, IP address and MAC address of each unit.To use the discovery tool, do the following:
1. Open a web browser and go to www.patton.com/SNDiscovery. A list of SmartNode utilities displays.
Identify the SmartNode Discovery Tool item in the list. Click the Download link and agree to the ser-
vice terms to save the file to your PC.
2. At your PC, double-click the SNDiscovery.exe filename to activate the tool. The SmartNode Discovery
Tool window will display the IP Address, MAC Address, Device Type (model number) and Build (soft-
ware release) of your SN4120.
If your SN4120 does not appear:
• Make sure the SN4120 and your PC are on the same routed subnet.
• Make sure any firewall programs on your PC are disabled.

Introduction

"Start the SmartNode Discovery Tool"

"Configuring your SN4120"
Figure 4. SmartNode Discovery Tool window
4 • SmartNode initial configuration
"Access the Web Browser (GUI) Interface"
on page 29)
on page 26)
on
26