Using the Probe
Using the N2819A Probe
WARNING
CAUTION
16
Before using the N2819A probe, attach the supplied probing accessories
to connect the probe inputs to the circuit under test.
options for connecting the supplied clips, leads, and pins. Gently press the
probing accessories into the end of the probe's tip. A label on the probe tip
identifies the probe's positive and negative leads.
Must be Grounded. Before making connections to the input leads
of this probe, ensure that the probe's output connector is
attached to the channel input of the oscilloscope and the
oscilloscope is properly grounded.
Figure 9
Probe Clip, Lead, and Pin Connections
To protect against electrical shock, use only the accessories supplied
with this probe or in the accessory kit.
Figure 9
Keysight N2818/9A Differential Probes User Guide
shows the