Keysight N2818 User Manual page 14

Using the Probe
14
Perform the following steps to connect the N7013/14A extreme
temperature kit to the N2818A probe:
1 Connect the red and black extreme temperature differential extension
cables to the existing probe cables.
Figure 6 Connecting the Extreme Temperature Differential Extension Cables
2 Connect the red and black extreme temperature hook tip adapters to
the extreme temperature differential extension cables which are
already connected to the existing probe cables.
Figure 7 Connecting the Extreme Temperature Hook Tip Adapters
Keysight N2818/9A Differential Probes User Guide