Check; Adjustment - Stiga Titan Series Workshop Manual

5.4.4 Check

• Check that the cable can move easily in
the housing along the whole length of
the stroke.
• Check that the cable is free of sharp
kinks and other damage. The casing
must be fault free so that water cannot
penetrate.
• Check that the end seals are intact.

5.4.5 Adjustment

1. When the throttle control is in neutral
position it must not be possible to
move the arm closer to the idle posi-
tion.
2. Put the throttle control at full throttle.
In this position arm A should be
against screw B.
Adjust the nuts of the housing adjuster
sleeve to the criteria above.
WORKSHOP MANUAL
TITAN
Chapter
5 - Control cables
B
A
EDITION Page
2018 94