Brake Cable; Description; Dismantling - Stiga Titan Series Workshop Manual

5.3 Brake cables
Warning!
Never use a machine with faulty
brakes.
The parking brake must not be
used as a service brake and must
only be activated when the ma-
chine is stationary. Incorrect use
will damage the components.

5.3.1 Description

The brake cables transfer the movement
from the parking brake pedal to the brake
levers on the wheel motors. The brakes
are part of the machine safety system. It
is very important that the brake cables
are fault free and correctly adjusted.

5.3.2 Dismantling

1. Remove the steering bracket's rear
cover. See"3.1.1".
2. Slacken off screw A and release the
cable ends.
3. Slacken off adjuster nuts B (2x).
4. Slacken off the adjuster nuts and un-
hook cables C (4x) from the springs
on the wheel motors.
5. Note how the cable is routed so that
the new cable can be reinstalled in the
same way.
WORKSHOP MANUAL
TITAN
Chapter
5 - Control cables
A
B
C
EDITION Page
2018 90