Description - Stiga Titan Series Workshop Manual

WORKSHOP MANUAL Chapter EDITION Page
TITAN 2 - Chassis and bodywork 2018 20

2.1 Description

The chassis is built around an articulated
frame with the pivot in the centre. This
means that both the front and rear wheels
participate in the turning movement,
where the rear wheels follow in the tracks
of the front wheels. This is a great advan-
tage when mowing around trees or cor-
ners. The rear wheels never take a
shorter route and hit obstacles.
This configuration also means that an op-
timal unmown circle is created when the
machine is operated at full lock.
The articulated frame also pivots vertical-
ly, ±10° when the machine is straight
ahead and ±2° at full lock. This makes it
possible for all four wheels to press even-
ly against the ground when the machine
is driven on uneven surfaces.
The chassis is equipped with controls
that operate the machine functions and
implements. I.e. cables and shafts bet-
wen the brake and pedal, lift mechanism,
cable to the throttle etc.