Safety Checks; General Safety Checks; Electric Safety Check - Stiga Titan Series Workshop Manual

1.5 Safety checks

1.5.1 General safety checks

Object
Fuel lines and connections.
Power cables.
Exhaust system.
Hydraulic hoses.
Drive the machine forwards/backwards and
release the drive/service brake pedal (the
right pedal).
Test driving.

1.5.2 Electric safety check

Status
The clutch/brake pedal not depressed.
PTO not activated.
The clutch/brake pedal depressed.
PTO activated. (The control for the
implement lifter must be in floating
position in order for the power take-off
to be activated.)
Engine running. PTO activated.
Control for implement lifter not in float-
ing position.
WORKSHOP MANUAL
TITAN
Chapter
1 - General instructions
Result
No leakage.
All insulation intact.
No mechanical damage.
No leakage in the connections.
All screws tightened.
No leakage. No damage.
The machine must stop within 15 me-
tres.
No unusual vibrations.
No unusual noise.
Action
Attempt to start.
Attempt to start.
The operator leaves
the seat.
Attempt to engage
PTO.
EDITION
2018
Result
The engine should not
start.
The engine should not
start.
PTO should disengage.
PTO cannot be engaged.
Page
8