Throttle Cable; Description; Dismantling; Assembly - Stiga Titan Series Workshop Manual

5.4 Throttle cable

5.4.1 Description

The throttle cable is integrated with the
throttle control and is replaced as one
unit.

5.4.2 Dismantling

1. Remove and lift off the cab.
See "2.4.5".
2. Remove the front right side cover and
the control panel. See "2.2.2".
3. Remove control knob A by screwing
and simultaneously pulling it upwards.
4. Slacken off the screws B (4x) with
nuts.
5. Remove the cable from the motor by
locking screw C and the adjuster nuts
D.
6. Note how the cable is routed so that
the new cable can be reinstalled in the
same way.

5.4.3 Assembly

1. Install the cable in the same way as
the one installed previously. Also see
the image.
2. Reinstall the other parts in reverse or-
der.
3. Adjust the cable. See "5.4.5".
WORKSHOP MANUAL
TITAN
Chapter
5 - Control cables
A
B
EDITION Page
2018 93