Adjustment - Stiga Titan Series Workshop Manual

5.3.5 Adjustment

Warning!
Never use a machine with faulty
brakes.
It is very important that the brake cables
are correctly adjusted, otherwise the
parking brake/emergency brake does
not function as intended.
Adjust the brake cables as follows:
1. The spring must be completely unaf-
fected when the brake is not activat-
ed.
2. Activate and lock the brake.
3. The spring body length must be 42
mm.
4. Adjust so that all four springs have the
dimensions above.
Attention! The cables can be adjusted
at both ends.
5. Lock the adjuster sleeves with the
nuts when the adjustment is com-
plete.
Check that the cables are slack
when the parking brake is not de-
pressed. Incorrect adjustment
causes greater wear to the brakes.
WORKSHOP MANUAL
TITAN
Chapter
5 - Control cables
EDITION
2018
42 mm
Page
92