General Safety Checks; Electrical Safety Check - Stiga PARK 120 2016 Workshop Manual

Edition Workshop Manual
2016 PARK 120 - PARK 220
1.5.1

General safety checks

Object
Fuel lines and connections.
Power cables.
Exhaust system.
Test drive.
1.5.2

Electrical safety check

Status
Driver not seated.
Parking brake engaged.
Driver not seated.
Parking brake disengaged.
Driver seated.
Parking brake engaged.
Engine on, cutting device
disengaged, parking brake
engaged.
Tyre, air pressure
Check the tyre pressure. Adjust if necessary. The recommended tyre pressure is 1 bar.
Engine oil
See the manual provided by the engine manufacturer.
Drive belts, check
Check the condition of all the belts and tensioners.
Steering, adjustment
See chapter 3
Engine air filter
Consult the "INSTRUCTION MANUAL" supplied with the machine. Also see the manual
provided by the engine manufacturer.
Try to start the engine.
Try to start the engine.
Try to start the engine.
The driver gets up
from the seat.
3.1.3.
No leaks.
All insulation intact.
No mechanical damage.
No leakage at the joins.
All screws tightened.
No abnormal vibrations.
No abnormal noise.
Action
The motor does not start.
The motor does not start.
The engine starts.
The engine turn off.
4.6
5.2
Chapter
1 General instructions
Result
Result
Page
12