Dhcp Client List; Figure 11: Ucm6510 Network Interface Method: Dual; Figure 12: Dhcp Client List - Grandstream Networks UCM6510 User Manual


Method: Dual
Both WAN port and LAN port are used for uplink connection. WAN port will be mapped to LAN 1
interface; LAN port will be mapped to LAN 2 interface. Users will need assign LAN 1 or LAN 2 as the
default interface in option "Default Interface" and configure "Gateway IP" if static IP is used for this
interface.

DHCP Client List

This page lists all the detected devices on the LAN and the IP addresses that were provided to them.
Additionally, users can manually link a MAC address to an IP address.
When devices receive IP addresses from the UCM's DHCP server, they will be listed in the System
SettingsNetwork SettingsDHCP Client List page as shown below:

Figure 11: UCM6510 Network Interface Method: Dual

Figure 12: DHCP Client List

UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e | 66