Table 72: Conference Settings - Grandstream Networks UCM6510 User Manual

Ip pbx
Hide thumbs Also See for UCM6510:
Table of Contents

Advertisement

Skip Authentication
Conference Settings contains the following options:
Enable Talk detection
DSP Talking Threshold
DSP Silence Threshold
Enable Neteq
Users can check the talking Caller IDs in conference control page (UCM WebUICall
FeaturesConference). The image will move up and down when the user is talking.
If enabled, the invitation from Web GUI for a conference room with
password will skip the authentication for the invited users. The default
setting is "No".

Table 72: Conference Settings

If enabled, the AMI will send the corresponding event when a user starts or
ends talking.
The time in milliseconds of sound above what the dsp has established as
base line silence for a user before a user is considered to be talking. This
value affects several operations and should not be changed unless the
impact on call quality is fully understood, the default value is 128.
The time in milliseconds of sound falling within the what the dsp has
established as base line silence before a user is considered to be silent.
This value affects several operations and should not be changed unless the
impact on call quality is fully understood, the default value is 2500.
If enabled, conference audio quality may improve, but system performance
will be lowered.
Figure 139: Conference
UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e
|
246

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UCM6510 and is the answer not in the manual?

Table of Contents

Save PDF