Here is an example of an environment and how to configure port forwarding to an endpoint's web portal:
Configure the UCM as a router by selecting "Route" in System SettingsNetwork SettingsBasic
SettingsMethod.
WAN port is connected to an uplink switch with a public IP address configured (e.g., 1.1.1.1).
LAN port provides a DHCP pool for devices on the LAN network (gateway address is
192.168.2.1 by default).
Connect a GXP2160 to the UCM's LAN network. It should obtain an IP address from UCM's DHCP
pool.
While still on the Network Settings page, navigate to the Port Forwarding tab.
Click on
WAN Port: Enter the port that will be opened on the WAN side to allow access.
LAN IP: Enter the GXP2160's IP address.
LAN Port: Enter the port that will be opened on the GXP2160 to allow access.
Protocol Type: Select the protocol to use for this port forwarding.
button to start setting up port forwarding.
Figure 19: Create New Port Forwarding
UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e
|
72