Firmware Version 1.0.2.7; Firmware Version 1.0.2.5 - Grandstream Networks UCM6510 User Manual


Added options "External Host" and "Use IP address in SDP" in Web GUIPBXSIP SettingsNAT.
[SIP Settings/NAT]

Improved CDR. [CDR Improvement]

Added Network Status page under web GUI System StatusNetwork Status. [Network Status]

Firmware Version 1.0.2.7


Added PRI T310 configuration. [Digital Hardware Configuration]

Added Announcement Center. [ANNOUNCEMENTS CENTER]

Firmware Version 1.0.2.5


Added option to enable/disable SSH access via LCD or Web GUI. [TLS Security][SSH Access]

Added ability to select voicemail storage (Email + WAV is supported). [Voicemail Email Settings]

Added support to allow remote peer extensions in ring group. [Remote Extension in Ring Group]

Added ability to strip and prepend digits in inbound routes. [Inbound Rule Configurations]

Added ability to search extensions on Extension page.

Added user portal for users to log in with extension number, access user information, extension
configuration and CDR. [USER PORTAL]

Added support to send Fax via Web GUI. [Fax Sending]

Added "Enable LDAP" option to skip the extension from UCM default LDAP phonebook. [Voicemail
Email Settings]

Added video RE-INVITE support.

Added DDNS Support. [DDNS Settings]

Added ability to search the CDR by called number. [CDR]

Added ability to select the file types for automatic backup. [Backup/Restore]

Added automatic backup support on SD Card or USB storage. [Backup/Restore]

Added support to skip trunk authentication by time condition.

Added option to send P-Asserted-Identity header in SIP Register Trunk. [VOIP TRUNKS]

Added ability to specify trunks in CDR filters. [CDR]

Added ability to use Pattern in Caller Number to filter CDR. [CDR]

Added support to send UNREGISTER when VoIP trunk is disabled. [VOIP TRUNKS]

Added LDAP client support. [LDAP Client Configurations]

Added option to specify the chronological order to voice mails. [VOICEMAIL]

Added option to configure whether to skip pressing 1/2 to accept or reject calls from Follow Me
[FOLLOW ME]

Added option to specify port range in Port Forwarding configuration. [Port Forwarding]

Added ability to go back to IVR menu from Dial By Name by pressing the star key. [Dial By Name
Configuration]

Added ability to filter alert logs. [Alert Log]

Added ability to delete alert logs. [Alert Log]

Added NAT option for peer trunk. [VOIP TRUNKS]
UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e | 42