L2Tp Client Configuration - Grandstream Networks GWN70 Series User Manual

Hide thumbs Also See for GWN70 Series:
Table of Contents

Advertisement

Deny Server Push Routes
IP Masquerading
LZO Compression
Allow Peer to Change IP
CA Certi cate
Customer Certi cate
Customer Private Key
Customer Private Key
Password
L2TP Configuration
Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs) or as part of the delivery of services
by ISPs. It does not provide any encryption or con dentiality by itself. Rather, it relies on an encryption protocol that it passes within the tunnel
to provide privacy.

L2TP Client Configuration

To con gure the L2TP client on the GWN70xx router, navigate under
1. Click on
button and the following window will pop up.
Here we set the IP range for the Core Site LAN (i.e. 192.168.80.0/24).
Note:
it's also possible to add the VLANs on server side.
If enabled, client will ignore routes pushed by the server.
This feature is a form of network address translation (NAT) which allows internal computers with no known address
outside their network, to communicate to the outside. It allows one machine to act on behalf of other machines.
Select whether to activate LZO compression or no, if set to "Adaptive", the server will make the decision whether
this option will be enabled or no.
LZO encoding provides a very high compression ratio with good performance. LZO encoding works especially well
for CHAR and VARCHAR columns that store very long character strings.
Allow remote change the IP and/or Port, often applicable to the situation when the remote IP address changes
frequently.
Click on "Upload" and select the "CA" certi cate
Note:
This can be generated in
Click on "Upload" and select the "Client Certi cate".
Note:
This can be generated in
Click on "Upload" and select the "Client Private Key".
Note:
This can be generated in
Enter the client private key password
Note: This can be con gured in
OpenVPN® Client Settings page
"System Settings
Certi cate Management
"System Settings
Certi cate Management
"System Settings
Certi cate Management
"System Settings
Certi cate Management
"VPN
VPN Clients"
CA Certi
cate"
Certi
cate"
Certi
cate"
→ User"
and set the followings:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gwn7052Gwn7052f

Table of Contents