Grandstream Networks UCM6510 User Manual page 143

Keep Voicemail after
Emailing
Enable Keep-alive
Keep-alive Frequency
Disable This Extension
User Settings
First Name
Last Name
Email Address
User Password
Language
Concurrent Registrations
Mobile Phone Number
Configure whether or not to retain the voicemail in local storage after
sending the voicemail attachment in the email notification.
If enabled, empty SDP packet will be sent to the SIP server periodically to
keep the NAT port open. The default setting is "Yes".
Configure the Keep-alive interval (in seconds) to check if the host is up.
The default setting is 60 seconds.
If selected, this extension will be disabled on the UCM6510.
Note: The disabled extension still exists on the PBX but cannot be used
on the end device.
Configure the user's first name. This field supports alphanumeric
characters, underscores (_), and periods.
Configures the user's last name. This field supports alphanumeric
characters, underscores (_), and periods.
Configure the user's email address. Email notifications will be sent to this
address.
Configure the password for user portal access. A random password is
automatically generated by default and is highly recommended for
security.
Select the voice prompt language that will be used for this extension. By
default, the selected voice prompt language under PBX SettingsVoice
PromptLanguage Settings will be used. To add more supported
languages, please download the voice prompt language packages in the
same page.
The maximum allowed number of endpoint registrations to this extension.
Default value is 1.
Configure a phone number for the extension. Users can dial the Direct Dial
Mobile Phone Prefix feature code (*88 by default) + extension number to
directly dial this number. Example: Dial *881000 to call the mobile number
associated with extension 1000.
UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e | 142