Parking Lot; Figure 234: Enable/Disable Feature Codes - Grandstream Networks UCM6510 User Manual

Dynamic Agent Logout
Voicemail Group Access Code
The UCM6510 also allows user to enable / disable specific feature code by one click. As shown below:

Parking Lot

User can create parking lots and their related slots under Web GUI Call Features Parking Lot. In the
Parking Lot page, users can create lots of their own. This allows different groups within an organization to
have their own parking lots instead of sharing one large parking lot with others. While creating a new parking
lot, users can assign it a range that they think is appropriate for the group that will use the parking lot.

Default Code: *85

Use this code to logout the dynamic agent from all queues.
Call voicemail group access code to access group voicemail. If
password is required, enter password followed by pound "#" key.

Figure 234: Enable/Disable Feature codes

UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e | 359