Connecting To Pms; Table 132: Pms Basic Settings - Grandstream Networks UCM6510 User Manual

For more details, please refer to online

Connecting to PMS

On the UCM WebGUIValue-added FeaturesPMSBasic Settings" set the connection information
for the PMS platform.
Field
PMS Module
Wake Up Prompt
PMS URL
UCM Port
Username
Password
Site
Back Up Voicemail
Recordings
Email address
In order to use some PMS features please activate the feature code associated under "Call
FeaturesFeature Codes"

Update PMS Room Status

PMS Wake Up Service
PMS API Guide.

Table 132: PMS Basic Settings

Description
Users can select the desired PMS module from the drop-down list.

Hmobile.

Mitel.

HSC.

PMS API
Prompt used when answering the wakeup calls it can be customized
from "PBX SettingsVoice PromptCustom Prompt.
Enter the PMS system URL.
If using "Hmobile" PMS Module only.
Enter the Port used by the PMS system. Default is 8081.
If
Enter the Username to connect to the PMS system.
If using "Hmobile" or "HSC" PMS Module only.
Enter the password to connect to the PMS system.
If using "Hmobile" or "HSC" PMS Module only.
Enter the site to connect to the PMS system.
If using "Hmobile" PMS Module only.
If enabled, this option allows backing up voicemail recordings to external
storage after check-out. Voicemail can be backed up to SD card, USB
disk, NAS, or an SFTP server
Configure the email address to send the backup to.
UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e | 406