Conference Settings; Table 77: Video Conference Basic Settings; Figure 151 : Video Conference Basic Settings - Grandstream Networks UCM6510 User Manual

Conference Settings

Basic Settings
Video Conferencing
Bind UDP Port
Packet Loss Retransmission
FEC
Enable Talk Detection
DSP Talking Threshold
DSP Silence Threshold

Figure 151 : Video Conference Basic settings

Table 77: Video Conference Basic Settings

This option should be enabled in order to activate the Video Conference
feature.
Configure the UDP port number for MCM. The standard UDP port for MCM
is 5062.
Configure to enable Packet Loss Retransmission.
If enabled, the Forward Error Correction (FEC) will be activated. The
default setting is "No".
If enabled, the AMI will send the corresponding event when a user starts
or stops talking.
The amount of time (ms) that sound exceeds what the DSP has
established as the baseline for silence before a user is considered to be
talking. This value affects several operations and should not be changed
unless the impact on call quality is fully understood.
The amount of time(ms) that sound falls within what the DSP has
established as the baseline for silence before a user is considered be
UCM6510 IP PBX User Manual
Version 1.0.20.31
P a g e | 259