learning and understanding. In order to accelerate adjustment and facilitate measurement,
users can directly press AUTO key and the oscilloscope will then display applicable
waveform and range settings.
Apart from the easy operation, the oscilloscope also has high performance index and
powerful functions required for faster measurements. Faster signals can be observed with
the oscilloscope via 500MS/s (or 1GS/s) real‐time sampling and 25GS/s (or 50GS/s)
equivalent sampling. Powerful trigger and analysis ability make it easier to capture and
analyze waveforms. Clear LCD and mathematical operating functions make it easier for users
to observe and analyze signal problems in a faster and clearer way.
From the following parameter features, you can understand how the oscilloscope can satisfy
your measurement requirements.
Two analog channels
High resolution LCD display, 320×240 (or 400×240) resolution
Supports plug‐and‐play USB storage equipment for computer communication
Automatic waveform and state settings
Waveform saving and replay feature
Delicate window extension function and precise analysis on waveform details and
overview
Automatic measurement of 28 waveform parameters
Automatic cursor tracking measurement function
Unique functions of waveform recording and play‐back
Built‐in FFT software function
Multi‐waveform mathematical operation function (including: addition, subtraction,
multiplication and division)
Edge, video, pulse width, alternating trigger and other functions
Multi‐language menu selection
Simplified Chinese and English help information display
Ⅳ. Functions
The oscilloscope is disk type. It is designed with the conventional user interface for any
basic digital storage oscilloscope in the test and measurement industry.
This section will cover the following as the beginning guide of the oscilloscope:
1. Get to Know the User Interface
2. General Inspections
3. Functional Inspections
4. Probe Compensation
5. Automatic Settings of Waveform Display
Model 72‐7610/72‐10510 User Manual
3