acquisition only when trigger conditions are satisfied.
4. Set the Acquire System
Users can change the data acquisition mode by pressing ACQUIRE button as shown in the
figure below.
While ACQUIRE button is pressed, the data acquisition setting menu for the oscilloscope will
display.
Table 2‐11 Acquire Menu
Function
Menu
Acquisition
Mode (F1)
Averages
(@)
Sampling
(F3)
Fast Acq
(F4)
Figure 2‐17 Function Key of Sampling System
Settings
Sampling
Peak value
Average
2~256
Real‐time
Equivalence
ON
OFF
Model 72‐7610/72‐10510 User Manual
Description
Set to sampling acquisition mode
Set to peak value acquisition mode
Set to average acquisition mode
In average sampling mode, set average
number by using the multipurpose
knob (Averages can be set as 2, 4, 8,
16, 32, 64, 128, 256)
Set to Real‐time sampling
Set to Equivalent sampling
Turn on fast acquiring. Waveform
capturing rage up to 2k
waveform/second.
Turn off fast acquiring
37