Table of Contents
Advertisement
72‐7610 (Left) 72‐10510 (Middle) Trigger Menu Display (Right)
More trigger system settings will be explained in "Operations" section of this user manual.
Ⅴ. Specifications
Unless otherwise specified, all technical specifications are applicable to the probes with
attenuation switch set as 10× and to the oscilloscope. The oscilloscope must first meet
the following two conditions to satisfy those specification standards:
The oscilloscope must continuously run for over half an hour in the operating
temperature environment.
A. Technical Specifications
Sampling System Specifications
Sampling rate
Sampling
72‐7610
rate
72‐10510
Average
N can be chosen among 2, 4, 8, 16, 32, 64, 128 and 256; N is the number of
average samples.
Note: The real time sampling rate of 72‐7610 is 250MS/s, without equivalent sampling.
Input Channel
Specifications
Input coupling
Input impedance
Probe attenuation
coefficient
Figure 1‐11 Trigger Menu on the Panel
Real‐time
1GS/s
25MS/s
DC, AC and GND
72‐7610
72‐10510
1×, 10×, 100×, 1000×
12
Model 72‐7610/72‐10510 User Manual
Equivalent
50GS/s
1±2%MΩ with 21±3pF
1±2%MΩ with 24±3pF
Advertisement
Table of Contents
