Table of Contents
Advertisement
1-1.
Checking before Installation
1-1-1.
Checking the ROM and Software Version
When connecting the peripheral equipment in the list below to this unit, be sure to check that the ROM and software
version on each peripheral device is corresponding to the camera to be connected.
If the ROM and software version is lower than the specified below, be sure to perform ROM replacement and updating
the software.
If ROM replacement and updating the software are required, contact your local Sony Sales Office/Service Center.
ROM
Peripheral Equip-
Board Name
ment
CNU-700
AT-89 board or AT-89A board
Software
Peripheral Equipment
RCP-920/921
RCP-1000/1001
RCP-1500/1501/1530
HDCU2000/2500
MSU-900/950
MSU-1000
MSU-1500
BPU4000
HDC4300
Section 1
Service Overview
Ref. No.
IC4, IC5
Board Name
MPU-143 board
MPU-152 board
MPU-153 board
AT-167A board
CPU-396 board
MPU-150 board
MPU-151 board
AT-189 board
ROM Version
Ver. 1.30 and higher
Software Version
Ver. 1.11 and higher
Ver. 2.50 and higher
Ver. 2.50 and higher
Ver. 2.21 and higher
Ver. 1.21 and higher
Ver. 2.50 and higher
Ver. 2.50 and higher
Ver. 3.00 and higher
1-1
Advertisement
Table of Contents
