Table of Contents
Advertisement
2.
Disconnect the harness from the connector (CN2) on the CN-3423 board.
CN2
PSW2 x 5
3.
Install the removed parts by reversing the steps of removal.
4-8-7.
SW-1672 Board
Preparation
1.
Remove the outside panel assembly. (Refer
Procedure
1.
Remove the screw and pull out the SW-1672 board.
2.
Disconnect the harness from the connector (CN001) on the SW-1672 board.
Harness
CN001
PSW2 x 5
Note
When installing the SW-1672 board, match the boss with the slit.
3.
Install the removed parts by reversing the steps of removal.
HDC4300
CN-3423 board
to"4-3-1. Outside Panel
Slit
SW-1672 board
Harness
Assembly")
Boss
4-36
Advertisement
Table of Contents
