Table of Contents
Advertisement
Procedure
1.
Remove the two screws, and detach the REMOTE connector (CN-3430 board).
2.
Disconnect the harness from the connector (CN1) on the REMOTE connector (CN-3430 board).
REMOTE connector (CN-3430 board)
3.
Install the removed parts by reversing the steps of removal.
4-11-5.
DC IN Connector (CN-3432 Board)
Preparation
1.
Remove the MIC panel assembly. (Refer
Procedure
1.
Remove the two screws, and detach the DC IN connector (CN-3432 board).
2.
Disconnect the harness from the connector (CN2) on the DC IN connector (CN-3432 board).
DC IN connector (CN-3432 board)
3.
Install the removed parts by reversing the steps of removal.
HDC4300
CN1
Harness
to"4-11-1. CN-3429 Board/CN-3427 Board" on page 4-47
CN2
B2.6 x 5
B2.6 x 5
Harness
)
4-51
Advertisement
Table of Contents
