Table of Contents
Advertisement
3.
Remove the two screws, and detach the bracket (CN-3424).
Harnesses
CN-3424 board
Bracket (CN-3424)
Note
When installing the bracket (CN-3424), match the two bosses with the two holes.
4.
Install the removed parts by reversing the steps of removal.
4-8-11.
CN-3426 Board
Preparation
1.
Remove the inside panel assembly. (Refer to
Procedure
1.
Disconnect the flexible flat cable from the connector (CN1) on the CN-3426 board.
2.
Remove the two screws, and detach the CN-3426 board.
Boss
Flexible flat cable
Note
When installing the CN-3426 board, match the boss with the hole.
3.
Install the removed parts by reversing the steps of removal.
HDC4300
PSW2 x 5
CN5
Holes
CN2
CN4
CN3
Bosses
"4-2. Inside Panel
Hole
CN1
CN1
Harnesses
Assembly".)
CN-3426 board
PSW2 x 5
4-40
Advertisement
Table of Contents
