Connecting/Disconnecting Coaxial Cable - Sony HDC4300 Service Manual

Hide thumbs Also See for HDC4300:
Table of Contents

Advertisement

Type B
Disconnecting
Connector
Connector
1.
Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
Connecting
Connector
Guide
Connecting connector
Contact surface
Note
Insert the connector carefully so that the connector guides are not caught by the edge of the mating connector.
1.
Hold both sides of the fine-wire coaxial cable connector with the contact surface facing up.
2.
Insert the connector straight to meet the angle specified.
1-7-4.

Connecting/Disconnecting Coaxial Cable

Type A
Disconnecting
OK
Hold the plug to remove.
1.
Hold the plug of coaxial cable.
HDC4300
OK
Fine-wire coaxial cable
NG
Fine-wire coaxial cable
Guide
NG
Do not attempt to
remove by pulling the cable.
Hold the connector to disconnect.
Do not attempt to disconnect by
pulling the cable.
Angle regulation
Less than 2°
Less than 5°
1-17

Advertisement

Table of Contents
loading

Table of Contents