Table of Contents
Advertisement
4.
Disconnect the harness from the connector (CN1) on the SW-1525 board and remove the handle assembly.
B3 x 8
5.
Disconnect the harness from the connector (CN2) on the CN-3422 board.
6.
Remove the two screws, and detach the CN-3422 board.
B2.6 x 5
CN-3422 board
7.
Install the removed parts by reversing the steps of removal.
HDC4300
Handle assembly
Harness
CN1
CN2
harness
B3 x 8
SW-1525 board
4-24
Advertisement
Table of Contents
