Table of Contents
Advertisement
3.
Remove the nut and washer, and detach the PROMPTER connector.
Coaxial cable
Nut
Washer
4.
Install the removed parts by reversing the steps of removal.
4-3-7.
Coaxial Cable
Preparation
1.
Remove the outside panel assembly. (Refer
2.
Remove the MEM-147 board assembly. (Refer
Procedure
1.
Disconnect the coaxial cable from the connector (SDI1).
2.
Remove the four screws, and detach the two BNC caps, and two brackets BNC.
HDC4300
Bracket BNC
PROMPTER connector
BNC cap
to"4-3-1. Outside Panel
to"4-3-2. MEM-147 Board/TX-146
B2 x 5
Assembly")
Board")
4-14
Advertisement
Table of Contents
