Table of Contents
Advertisement
6.
Disconnect the harness from the connector (CN1) on the CN-3425 board.
Harness
7.
Remove the two screws and pull out the CN-3429 board.
8.
Disconnect the harness from the connector (CN1) on the CN-3429 board and remove the earphone packing.
Earphone packing
CN-3429 board
CN1
PSW2 x 5
9.
Disconnect the flexible flat cable from the connector (CN1) on the CN-3427 board.
10. Remove the UL tape.
11. Disconnect the three harnesses from the three connectors (CN2 CN3 and CN6) on the CN-3427 board.
HDC4300
CN-3432 board
MIC panel assembly
Harness
Harness
CN-3425 board
CN2
CN1
B2 x 5
4-48
Advertisement
Table of Contents
