4-12.
INCOM Panel Assembly
4-12-1.
INTERCOM Connector (CN-3431 Board)
Preparation
1.
Remove the inside panel assembly. (Refer
Procedure
1.
Disconnect the flexible flat cable from the connector (CN5) on the SY-408 board.
2.
Disconnect the two harnesses from the two connectors (CN6, CN7) on the SY-408 board.
Flexible flat cable
Note
When connecting the two harnesses, pay attention to their colors.
3.
Remove the six screws, and detach the INCOM panel assembly.
4.
Remove the four screws, and detach the two INTERCOM connectors (CN-3431 boards).
HDC4300
to"4-2. Inside Panel
SY-408 board
CN5
CN6
CN7
B2 x 5
B2 x 5
Assembly")
Harness (gray)
Harness (white)
INCOM panel assembly
B2 x 5
B2 x 5
4-52